Skip to main content

Konfigurasi CFM Switch Ciena

 
OID : .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.13.12

sisi A-END
cfm service create vlan 565 name CFMNAME1
cfm service set service CFMNAME1 ccm-interval 10ms
cfm service enable service CFMNAME1
cfm mep create service CFMNAME1 port 23 type down mepid 34


sisi z-END
cfm service create vlan 565 name CFMNAME1
cfm service set service CFMNAME1 ccm-interval 10ms
cfm service enable service CFMNAME1
cfm mep create service CFMNAME1 port 2 type down mepid 35

Popular posts from this blog

KONFIGURASI VPLS DENGAN MPLS LDP DI ROUTER MIKROTIK

REVIEW MPLS What is MPLS • MPLS stands for “Multi-Protocol Label Switching”. • MPLS is best summarized as a “Layer 2.5 networking protocol”. • MPLS combines layer 2 switching technology and layer 3 routing technology so that it becomes the best network solution in solving speed, scalability, QOS (Quality of Service), and traffic engineering problems.

Command Reference Raisecom OLT

Check onu status: show epon-onu information Check mac interface vlan: show pon mac-address-table l2-address interface epon-onu 1/1/14 Mac Address     Port                      VLAN  Flag ---------------------------------------------------- 9800.7457.ccd4  onu1/1/14                 713   Hit 9800.7457.ccd3  onu1/1/14                 46    Hit   Check illegal onu: show interface epon-olt illegal-onu

Konfigurasi IP Address Static Centos 7/8

  # static IP address on CentOS 7 or RHEL 7# HWADDR=00:08:A2:0A:BA:B8 TYPE=Ethernet BOOTPROTO=none # Server IP # IPADDR=192.168.2.203 # Subnet # PREFIX=24 # Set default gateway IP # GATEWAY=192.168.2.254 # Set dns servers # DNS1=192.168.2.254 DNS2=8.8.8.8 DNS3=8.8.4.4 DEFROUTE=yes IPV4_FAILURE_FATAL=no # Disable ipv6 # IPV6INIT=no NAME=eth0 # This is system specific and can be created using 'uuidgen eth0' command # UUID=41171a6f-bce1-44de-8a6e-cf5e782f8bd6 DEVICE=eth0 ONBOOT=yes